{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1695694121233 ""} { "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition " "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1695694121243 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 26 10:08:41 2023 " "Processing started: Tue Sep 26 10:08:41 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1695694121243 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1695694121243 ""} { "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off decoder24 -c decoder24 " "Command: quartus_map --read_settings_files=on --write_settings_files=off decoder24 -c decoder24" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1695694121243 ""} { "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1695694121523 ""} { "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "6 6 " "Parallel compilation is enabled and will use 6 of the 6 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1695694121523 ""} { "Warning" "WSGN_SEARCH_FILE" "decoder2627.bdf 1 1 " "Using design file decoder2627.bdf, which is not specified as a design file for the current project, but contains definitions for 1 design units and 1 entities in project" { { "Info" "ISGN_ENTITY_NAME" "1 decoder2627 " "Found entity 1: decoder2627" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { } } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1695694128199 ""} } { } 0 12125 "Using design file %1!s!, which is not specified as a design file for the current project, but contains definitions for %2!llu! design units and %3!llu! entities in project" 0 0 "Analysis & Synthesis" 0 -1 1695694128199 ""} { "Info" "ISGN_START_ELABORATION_TOP" "decoder2627 " "Elaborating entity \"decoder2627\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1695694128199 ""} { "Warning" "WGDFX_PRIMITIVE_IGNORED" "AND2 inst2 " "Primitive \"AND2\" of instance \"inst2\" not used" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { { 232 416 480 280 "inst2" "" } } } } } 0 275008 "Primitive \"%1!s!\" of instance \"%2!s!\" not used" 0 0 "Analysis & Synthesis" 0 -1 1695694128199 ""} { "Warning" "WGDFX_PRIMITIVE_IGNORED" "AND2 inst3 " "Primitive \"AND2\" of instance \"inst3\" not used" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { { 312 416 480 360 "inst3" "" } } } } } 0 275008 "Primitive \"%1!s!\" of instance \"%2!s!\" not used" 0 0 "Analysis & Synthesis" 0 -1 1695694128199 ""} { "Warning" "WGDFX_PRIMITIVE_IGNORED" "NOT inst5 " "Primitive \"NOT\" of instance \"inst5\" not used" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { { 232 224 272 264 "inst5" "" } } } } } 0 275008 "Primitive \"%1!s!\" of instance \"%2!s!\" not used" 0 0 "Analysis & Synthesis" 0 -1 1695694128199 ""} { "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "F\[1\] GND " "Pin \"F\[1\]\" is stuck at GND" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { { 72 592 768 88 "F\[3\]" "" } { 160 592 768 176 "F\[2\]" "" } { 248 592 768 264 "F\[1\]" "" } { 328 592 768 344 "F\[0\]" "" } } } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1695694128439 "|decoder2627|F[1]"} { "Warning" "WMLS_MLS_STUCK_PIN" "F\[0\] GND " "Pin \"F\[0\]\" is stuck at GND" { } { { "decoder2627.bdf" "" { Schematic "D:/123/decoder2627.bdf" { { 72 592 768 88 "F\[3\]" "" } { 160 592 768 176 "F\[2\]" "" } { 248 592 768 264 "F\[1\]" "" } { 328 592 768 344 "F\[0\]" "" } } } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1695694128439 "|decoder2627|F[0]"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1695694128439 ""} { "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1695694128479 ""} { "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1695694128769 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1695694128769 ""} { "Info" "ICUT_CUT_TM_SUMMARY" "8 " "Implemented 8 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "2 " "Implemented 2 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1695694128819 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1695694128819 ""} { "Info" "ICUT_CUT_TM_LCELLS" "2 " "Implemented 2 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1695694128819 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1695694128819 ""} { "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 8 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 8 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "4760 " "Peak virtual memory: 4760 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1695694128839 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 26 10:08:48 2023 " "Processing ended: Tue Sep 26 10:08:48 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1695694128839 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Elapsed time: 00:00:07" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1695694128839 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:18 " "Total CPU time (on all processors): 00:00:18" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1695694128839 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1695694128839 ""} { "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1695694129798 ""} { "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition " "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1695694129798 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 26 10:08:49 2023 " "Processing started: Tue Sep 26 10:08:49 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1695694129798 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1695694129798 ""} { "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off decoder24 -c decoder24 " "Command: quartus_fit --read_settings_files=off --write_settings_files=off decoder24 -c decoder24" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1695694129798 ""} { "Info" "0" "" "qfit2_default_script.tcl version: #3" { } { } 0 0 "qfit2_default_script.tcl version: #3" 0 0 "Fitter" 0 0 1695694129878 ""} { "Info" "0" "" "Project = decoder24" { } { } 0 0 "Project = decoder24" 0 0 "Fitter" 0 0 1695694129878 ""} { "Info" "0" "" "Revision = decoder24" { } { } 0 0 "Revision = decoder24" 0 0 "Fitter" 0 0 1695694129878 ""} { "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1695694129918 ""} { "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "6 6 " "Parallel compilation is enabled and will use 6 of the 6 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1695694129918 ""} { "Info" "IMPP_MPP_USER_DEVICE" "decoder24 EP4CE55F23C8 " "Selected device EP4CE55F23C8 for design \"decoder24\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1695694129918 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1695694129958 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1695694129958 ""} { "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1695694130118 ""} { "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1695694130118 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE15F23C8 " "Device EP4CE15F23C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE40F23C8 " "Device EP4CE40F23C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE30F23C8 " "Device EP4CE30F23C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE75F23C8 " "Device EP4CE75F23C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE115F23C8 " "Device EP4CE115F23C8 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695694130258 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1695694130258 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "5 " "Fitter converted 5 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_ASDO_DATA1~ D1 " "Pin ~ALTERA_ASDO_DATA1~ is reserved at location D1" { } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_ASDO_DATA1~ } } } { "temporary_test_loc" "" { Generic "D:/123/" { { 0 { 0 ""} 0 23 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_FLASH_nCE_nCSO~ E2 " "Pin ~ALTERA_FLASH_nCE_nCSO~ is reserved at location E2" { } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_FLASH_nCE_nCSO~ } } } { "temporary_test_loc" "" { Generic "D:/123/" { { 0 { 0 ""} 0 25 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DCLK~ K2 " "Pin ~ALTERA_DCLK~ is reserved at location K2" { } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DCLK~ } } } { "temporary_test_loc" "" { Generic "D:/123/" { { 0 { 0 ""} 0 27 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DATA0~ K1 " "Pin ~ALTERA_DATA0~ is reserved at location K1" { } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DATA0~ } } } { "temporary_test_loc" "" { Generic "D:/123/" { { 0 { 0 ""} 0 29 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695694130258 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCEO~ K22 " "Pin ~ALTERA_nCEO~ is reserved at location K22" { } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_nCEO~ } } } { "temporary_test_loc" "" { Generic "D:/123/" { { 0 { 0 ""} 0 31 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695694130258 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1695694130258 ""} { "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1695694130258 ""} { "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "6 6 " "No exact pin location assignment(s) for 6 pins of 6 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." { } { } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1695694130578 ""} { "Critical Warning" "WSTA_SDC_NOT_FOUND" "decoder24.sdc " "Synopsys Design Constraints File file not found: 'decoder24.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1695694130668 ""} { "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1695694130668 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "6 unused 2.5V 2 4 0 " "Number of I/O pins in group: 6 (unused VREF, 2.5V VCCIO, 2 input, 4 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "2.5 V. " "I/O standards used: 2.5 V." { } { } 0 176212 "I/O standards used: %1!s!" 0 0 "Design Software" 0 -1 1695694130668 ""} } { } 0 176211 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "Design Software" 0 -1 1695694130668 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 4 29 " "I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 4 total pin(s) used -- 29 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 41 " "I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 41 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 42 " "I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 42 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 43 " "I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 43 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use undetermined 0 41 " "I/O bank number 5 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 41 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use undetermined 1 38 " "I/O bank number 6 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used -- 38 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use undetermined 0 43 " "I/O bank number 7 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 43 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use undetermined 0 43 " "I/O bank number 8 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 43 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1695694130668 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Design Software" 0 -1 1695694130668 ""} } { } 0 176215 "I/O bank details %1!s! I/O pin placement" 0 0 "Fitter" 0 -1 1695694130668 ""} { "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695694130678 ""} { "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1695694130678 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1695694131398 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695694131438 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1695694131458 ""} { "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1695694131567 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695694131567 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1695694131697 ""} { "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y32 X10_Y42 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y32 to location X10_Y42" { } { { "loc" "" { Generic "D:/123/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y32 to location X10_Y42"} { { 12 { 0 ""} 0 32 11 11 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1695694132717 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1695694132717 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1695694132787 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1695694132787 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1695694132787 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695694132787 ""} { "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.03 " "Total time spent on timing analysis during the Fitter is 0.03 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1695694132887 ""} { "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1695694132887 ""} { "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1695694133007 ""} { "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1695694133007 ""} { "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1695694133137 ""} { "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695694133377 ""} { "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/123/output_files/decoder24.fit.smsg " "Generated suppressed messages file D:/123/output_files/decoder24.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1695694133556 ""} { "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "5703 " "Peak virtual memory: 5703 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1695694133806 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 26 10:08:53 2023 " "Processing ended: Tue Sep 26 10:08:53 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1695694133806 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1695694133806 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1695694133806 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1695694133806 ""} { "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1695694134656 ""} { "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition " "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1695694134666 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 26 10:08:54 2023 " "Processing started: Tue Sep 26 10:08:54 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1695694134666 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1695694134666 ""} { "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off decoder24 -c decoder24 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off decoder24 -c decoder24" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1695694134666 ""} { "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1695694134836 ""} { "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1695694135785 ""} { "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1695694135825 ""} { "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "4676 " "Peak virtual memory: 4676 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1695694135975 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 26 10:08:55 2023 " "Processing ended: Tue Sep 26 10:08:55 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1695694135975 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1695694135975 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1695694135975 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1695694135975 ""} { "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1695694136545 ""} { "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1695694136915 ""} { "Info" "IQEXE_START_BANNER_PRODUCT" "TimeQuest Timing Analyzer Quartus Prime " "Running Quartus Prime TimeQuest Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition " "Version 17.1.0 Build 590 10/25/2017 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1695694136925 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 26 10:08:56 2023 " "Processing started: Tue Sep 26 10:08:56 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1695694136925 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694136925 ""} { "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta decoder24 -c decoder24 " "Command: quartus_sta decoder24 -c decoder24" { } { } 0 0 "Command: %1!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694136925 ""} { "Info" "0" "" "qsta_default_script.tcl version: #3" { } { } 0 0 "qsta_default_script.tcl version: #3" 0 0 "TimeQuest Timing Analyzer" 0 0 1695694137005 ""} { "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137184 ""} { "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "6 6 " "Parallel compilation is enabled and will use 6 of the 6 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137184 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137214 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137214 ""} { "Critical Warning" "WSTA_SDC_NOT_FOUND" "decoder24.sdc " "Synopsys Design Constraints File file not found: 'decoder24.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137424 ""} { "Info" "0" "" "Found TIMEQUEST_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMEQUEST_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "TimeQuest Timing Analyzer" 0 0 1695694137424 ""} { "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137434 ""} { "Info" "0" "" "Analyzing Slow 1200mV 85C Model" { } { } 0 0 "Analyzing Slow 1200mV 85C Model" 0 0 "TimeQuest Timing Analyzer" 0 0 1695694137434 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137434 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137444 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137444 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137444 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137454 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137454 ""} { "Info" "0" "" "Analyzing Slow 1200mV 0C Model" { } { } 0 0 "Analyzing Slow 1200mV 0C Model" 0 0 "TimeQuest Timing Analyzer" 0 0 1695694137464 ""} { "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137474 ""} { "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137624 ""} { "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137674 ""} { "Info" "0" "" "Analyzing Fast 1200mV 0C Model" { } { } 0 0 "Analyzing Fast 1200mV 0C Model" 0 0 "TimeQuest Timing Analyzer" 0 0 1695694137684 ""} { "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137754 ""} { "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137764 ""} { "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694137774 ""} { "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694138014 ""} { "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694138014 ""} { "Info" "IQEXE_ERROR_COUNT" "TimeQuest Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime TimeQuest Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "4810 " "Peak virtual memory: 4810 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1695694138044 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 26 10:08:58 2023 " "Processing ended: Tue Sep 26 10:08:58 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1695694138044 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1695694138044 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1695694138044 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694138044 ""} { "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 20 s " "Quartus Prime Full Compilation was successful. 0 errors, 20 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "TimeQuest Timing Analyzer" 0 -1 1695694138654 ""}