{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines.  Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." {  } {  } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines.  Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1695695101966 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "6 6 " "Parallel compilation is enabled and will use 6 of the 6 processors detected" {  } {  } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1695695101966 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "register2627 EP4CE6E22C6 " "Selected device EP4CE6E22C6 for design \"register2627\"" {  } {  } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1695695101966 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" {  } {  } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1695695102006 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" {  } {  } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1695695102006 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1695695102166 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." {  } {  } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1695695102176 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE10E22C6 " "Device EP4CE10E22C6 is compatible" {  } {  } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695695102476 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE15E22C6 " "Device EP4CE15E22C6 is compatible" {  } {  } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695695102476 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP4CE22E22C6 " "Device EP4CE22E22C6 is compatible" {  } {  } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1695695102476 ""}  } {  } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1695695102476 ""}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "5 " "Fitter converted 5 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_ASDO_DATA1~ 6 " "Pin ~ALTERA_ASDO_DATA1~ is reserved at location 6" {  } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_ASDO_DATA1~ } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 52 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695695102486 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_FLASH_nCE_nCSO~ 8 " "Pin ~ALTERA_FLASH_nCE_nCSO~ is reserved at location 8" {  } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_FLASH_nCE_nCSO~ } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 54 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695695102486 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DCLK~ 12 " "Pin ~ALTERA_DCLK~ is reserved at location 12" {  } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DCLK~ } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 56 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695695102486 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_DATA0~ 13 " "Pin ~ALTERA_DATA0~ is reserved at location 13" {  } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_DATA0~ } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 58 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695695102486 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCEO~ 101 " "Pin ~ALTERA_nCEO~ is reserved at location 101" {  } { { "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/17.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_nCEO~ } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 60 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1695695102486 ""}  } {  } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1695695102486 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" {  } {  } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1695695102496 ""}
{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "17 17 " "No exact pin location assignment(s) for 17 pins of 17 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." {  } {  } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1695695102676 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "register2627.sdc " "Synopsys Design Constraints File file not found: 'register2627.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." {  } {  } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1695695102836 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" {  } {  } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1695695102836 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" {  } {  } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1695695102836 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." {  } {  } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1695695102836 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." {  } {  } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1695695102836 ""}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "CLK~input (placed in PIN 23 (CLK1, DIFFCLK_0n)) " "Automatically promoted node CLK~input (placed in PIN 23 (CLK1, DIFFCLK_0n))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" {  } {  } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1695695102846 ""}  } { { "register2627.bdf" "" { Schematic "F:/quartus/3.register/register2627.bdf" { { 472 496 664 488 "CLK" "" } } } } { "temporary_test_loc" "" { Generic "F:/quartus/3.register/" { { 0 { 0 ""} 0 40 14177 15141 0 0 "" 0 "" "" }  }  } }  } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1695695102846 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" {  } {  } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" {  } {  } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" {  } {  } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" {  } {  } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" {  } {  } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" {  } {  } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" {  } {  } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1695695103016 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" {  } {  } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1695695103016 ""}  } {  } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1695695103016 ""}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "16 unused 2.5V 8 8 0 " "Number of I/O pins in group: 16 (unused VREF, 2.5V VCCIO, 8 input, 8 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "2.5 V. " "I/O standards used: 2.5 V." {  } {  } 0 176212 "I/O standards used: %1!s!" 0 0 "Design Software" 0 -1 1695695103016 ""}  } {  } 0 176211 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "Design Software" 0 -1 1695695103016 ""}  } {  } 0 176214 "Statistics of %1!s!" 0 0 "Fitter" 0 -1 1695695103016 ""}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 5 6 " "I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 5 total pin(s) used --  6 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 8 " "I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  8 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 11 " "I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  11 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 14 " "I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  14 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use undetermined 0 13 " "I/O bank number 5 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  13 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use undetermined 1 9 " "I/O bank number 6 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used --  9 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use undetermined 0 13 " "I/O bank number 7 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  13 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use undetermined 0 12 " "I/O bank number 8 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  12 pins available" {  } {  } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "Design Software" 0 -1 1695695103026 ""}  } {  } 0 176214 "Statistics of %1!s!" 0 0 "Design Software" 0 -1 1695695103026 ""}  } {  } 0 176215 "I/O bank details %1!s! I/O pin placement" 0 0 "Fitter" 0 -1 1695695103026 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" {  } {  } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695695103076 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." {  } {  } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1695695103086 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" {  } {  } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1695695103386 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695695103426 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" {  } {  } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1695695103436 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" {  } {  } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1695695103526 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695695103526 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" {  } {  } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1695695103696 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X23_Y12 X34_Y24 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X23_Y12 to location X34_Y24" {  } { { "loc" "" { Generic "F:/quartus/3.register/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X23_Y12 to location X34_Y24"} { { 12 { 0 ""} 23 12 12 13 }  }  }  }  } }  } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1695695103936 ""}  } {  } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1695695103936 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" {  } {  } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1695695103966 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" {  } {  } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1695695103966 ""}  } {  } 0 170199 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1695695103966 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695695103966 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.03 " "Total time spent on timing analysis during the Fitter is 0.03 seconds." {  } {  } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1695695104066 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" {  } {  } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1695695104076 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" {  } {  } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1695695104186 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" {  } {  } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1695695104186 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" {  } {  } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1695695104406 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" {  } {  } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1695695104626 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "F:/quartus/3.register/output_files/register2627.fit.smsg " "Generated suppressed messages file F:/quartus/3.register/output_files/register2627.fit.smsg" {  } {  } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1695695104796 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 5 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "5608 " "Peak virtual memory: 5608 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1695695105076 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 26 10:25:05 2023 " "Processing ended: Tue Sep 26 10:25:05 2023" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1695695105076 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1695695105076 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Total CPU time (on all processors): 00:00:03" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1695695105076 ""}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1695695105076 ""}