// megafunction wizard: %LPM_COUNTER%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: LPM_COUNTER 

// ============================================================
// File Name: lpm_counter0.v
// Megafunction Name(s):
// 			LPM_COUNTER
//
// Simulation Library Files(s):
// 			lpm
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 17.1.0 Build 590 10/25/2017 SJ Lite Edition
// ************************************************************


//Copyright (C) 2017  Intel Corporation. All rights reserved.
//Your use of Intel Corporation's design tools, logic functions 
//and other software and tools, and its AMPP partner logic 
//functions, and any output files from any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Intel Program License 
//Subscription Agreement, the Intel Quartus Prime License Agreement,
//the Intel FPGA IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Intel and sold by Intel or its authorized distributors.  Please
//refer to the applicable agreement for further details.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module lpm_counter0 (
	aclr,
	aload,
	clock,
	data,
	q);

	input	  aclr;
	input	  aload;
	input	  clock;
	input	[7:0]  data;
	output	[7:0]  q;

	wire [7:0] sub_wire0;
	wire [7:0] q = sub_wire0[7:0];

	lpm_counter	LPM_COUNTER_component (
				.aclr (aclr),
				.aload (aload),
				.clock (clock),
				.data (data),
				.q (sub_wire0),
				.aset (1'b0),
				.cin (1'b1),
				.clk_en (1'b1),
				.cnt_en (1'b1),
				.cout (),
				.eq (),
				.sclr (1'b0),
				.sload (1'b0),
				.sset (1'b0),
				.updown (1'b1));
	defparam
		LPM_COUNTER_component.lpm_direction = "UP",
		LPM_COUNTER_component.lpm_port_updown = "PORT_UNUSED",
		LPM_COUNTER_component.lpm_type = "LPM_COUNTER",
		LPM_COUNTER_component.lpm_width = 8;


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ACLR NUMERIC "1"
// Retrieval info: PRIVATE: ALOAD NUMERIC "1"
// Retrieval info: PRIVATE: ASET NUMERIC "0"
// Retrieval info: PRIVATE: ASET_ALL1 NUMERIC "1"
// Retrieval info: PRIVATE: CLK_EN NUMERIC "0"
// Retrieval info: PRIVATE: CNT_EN NUMERIC "0"
// Retrieval info: PRIVATE: CarryIn NUMERIC "0"
// Retrieval info: PRIVATE: CarryOut NUMERIC "0"
// Retrieval info: PRIVATE: Direction NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: PRIVATE: ModulusCounter NUMERIC "0"
// Retrieval info: PRIVATE: ModulusValue NUMERIC "0"
// Retrieval info: PRIVATE: SCLR NUMERIC "0"
// Retrieval info: PRIVATE: SLOAD NUMERIC "0"
// Retrieval info: PRIVATE: SSET NUMERIC "0"
// Retrieval info: PRIVATE: SSET_ALL1 NUMERIC "1"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: nBit NUMERIC "8"
// Retrieval info: PRIVATE: new_diagram STRING "1"
// Retrieval info: LIBRARY: lpm lpm.lpm_components.all
// Retrieval info: CONSTANT: LPM_DIRECTION STRING "UP"
// Retrieval info: CONSTANT: LPM_PORT_UPDOWN STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: LPM_TYPE STRING "LPM_COUNTER"
// Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "8"
// Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL "aclr"
// Retrieval info: USED_PORT: aload 0 0 0 0 INPUT NODEFVAL "aload"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL "clock"
// Retrieval info: USED_PORT: data 0 0 8 0 INPUT NODEFVAL "data[7..0]"
// Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL "q[7..0]"
// Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
// Retrieval info: CONNECT: @aload 0 0 0 0 aload 0 0 0 0
// Retrieval info: CONNECT: @clock 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: @data 0 0 8 0 data 0 0 8 0
// Retrieval info: CONNECT: q 0 0 8 0 @q 0 0 8 0
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0.bsf TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL lpm_counter0_bb.v TRUE
// Retrieval info: LIB_FILE: lpm